Managing Appliance Pages
You configure appliance configuration settings in the Appliances page: Appliance Pages tab. Appliance configuration settings are organized into appliance configuration pages so that you can easily configure common features, such as host settings and in-path rules.
Each appliance configuration page lists the applicable appliances and supported software on the right side of the page. You must pay close attention to the supported software versions—if the feature is not supported by the software you are running your configuration changes cannot be pushed to the appliance. For details about feature restrictions for appliances, see
Legacy Policy Push Restrictions.
Changes made to the appliance configuration pages are not applied until you have pushed the configuration to the appliance. For detailed information about pushing configuration settings to appliances, see
Pushing Policies to Selected Appliances or Appliance Groups.
This table summarizes the features you can configure or modify from the Appliances page: Appliance Pages tab.
Feature | Configuration Procedure |
Host Settings | |
Base Interfaces | |
In-Path Interfaces | |
Subnet Side Rules | |
Secure Socket Layer (SSL) | |
Licenses | |
Web Settings | |
Outbound QoS Interfaces | |
Inbound QoS Interfaces | |
Path Selection | |
Connection Forwarding | |
SteelFusion Settings | |
Virtual Services Platform | |
Data Interfaces | |
To configure or modify appliance feature settings
1. Choose Manage > Topology: Appliances to display the Appliances page.
2. Select the name of the appliance you want to configure to expand the page and display the Appliance tabs.
Figure: Displaying Appliance Tabs
3. Select the Appliance Pages tab to display the Appliance Configuration Pages list.
Figure: Displaying the Appliance Configuration Pages List
4. Select the name of the feature, such as Host Settings, to display the configuration settings you can configure or modify. On the right side of each feature appliance configuration pages is a list of applicable appliances.
Figure: Displaying Appliance Configuration Pages
5. To configure features for the specified appliance directly from this page, complete the configuration as described in this table.
Control | Description |
Editing Appliance | Select the appliance you want to edit from the drop-down list. |
Page | Select the feature you want to configure from the drop-down list. |
Include/Exclude | Optionally, click Include to include this page in the policy push. Or, click Exclude to exclude this page from the policy push. |
Page Applicable to | On the right side of the page is a list of applicable appliances and software restrictions. Make sure you have the correct product and software version installed—if you have a version mismatch you cannot push configuration changes to your appliances. |
Important: Changes made to the appliance configuration settings are modified on the remote appliance after a policy push. When you perform a policy push, the SCC is the master configuration; any local changes made on SteelHeads are overwritten.
These sections describe each feature you can configure or modify in detail.