Configuration Mode Commands : SteelHead Configuration Commands : Management In-Path Interface Commands : in-path interface mgmt-interface ip
  
in-path interface mgmt-interface ip
Specifies the static IP address and network mask for the management in-path (MIP) interface.
Syntax
[no] in-path interface <interface> mgmt-interface ip <ip-address>
Parameters
<interface>
MIP interface; for example, inpath0_0.
<ip-address>
IP address for the MIP interface.
Usage
The MIP interface must reside in its own subnet and cannot share the same subnet with any other interfaces on the SteelHead.
For details, see the Management Console online help or the SteelHead Management Console User’s Guide.
The no command option disables in-path support.
Note: This command requires you to also configure in-path interface vlan and in-path interface mgmt-interface vlan.
Example
amnesiac (config) # in-path interface inpath0_0 mgmt-interface ip 90.55.0.1
Product
SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands
in-path interface vlan, in-path interface mgmt-interface vlan, show in-path mgmt-interface