in-path interface vlan
Enables VLAN support for an in-path interface on a trunked link.
Syntax
[no] in-path interface <interface> vlan <id>
Parameters
<interface> | In-path interface for which the VLAN applies. For example, inpath0_0. |
<id> | VLAN identification number. The VLAN identification number is a value with a range from 0 to 4094 (0 specifies no tagging). |
Usage
This command enables you to set which VLAN to use for connections. It does not define which VLAN to optimize.
To define which VLAN to optimize, you must define in-path rules and apply them to all VLANs or a specific VLAN.
The no command option disables the VLAN support.
Example
amnesiac (config) # in-path interface inpath0_0 vlan 26
Product
Interceptor, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands