Configuration Mode Commands : System Administration Commands : SNMP Commands : snmp-server host traps version
  
snmp-server host traps version
Configures the SNMP version of traps to send to the host.
Syntax
[no] snmp-server host {<hostname> |<ip-address>} traps version {1 | 2 c} <community-string> [port <port>]
Parameters
<hostname>
Hostname for the SNMP server.
<ip-address>
IPv4 address or IPv6 address for the SNMP server.
<version>
SNMP version of traps to send to this host:
•  1 - SNMPv1
•  2c - SNMPv2c
<community-string>
Specifies the password-like community string to control access. Use a combination of uppercase, lowercase, and numerical characters to reduce the chance of unauthorized access to the SteelHead. The pound sign (#) and hyphen (-) characters are not allowed at the beginning of the community string.
port <port>
Specifies the destination port.
Usage
The no command option disables the SNMP server host.
Example
amnesiac (config) # snmp-server host 10.0.0.1 traps version 1 public port 41148
Product
SCC, Interceptor, Mobile Controller, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands
show snmp, snmp-server community, snmp-server security-name