snmp-server community
Sets an SNMP read-only server community.
Syntax
[no] snmp-server community <name>
Parameters
<name> | Name of the SNMP server community. The pound sign (#) and hyphen (-) characters are not allowed at the beginning of the name. If you use either of these characters at the beginning of the name, the CLI returns the following error message: % Invalid SNMP community name |
Usage
For details about SNMP traps sent to configured servers, see the Management Console online help or the SteelHead Management Console User’s Guide.
You can still access the entire MIB tree from any source host using this setting. If you do not want this type of access, you must delete this option and configure the security name for SNMP ACL support. For details, see
snmp-server group.
This community string overrides any VACM settings.
The no command option disables an SNMP server community.
Example
amnesiac (config) # snmp-server community ReaDonLy
Product
SCC, Interceptor, Mobile Controller, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands