Configuration Mode Commands : System Administration Commands : Notification Commands : email send-test
  
email send-test
Sends a test email to all configured event and failure recipients.
Syntax
email send-test
Parameters
None
Usage
You can also access this command from enable mode.
Example
amnesiac (config) # email send-test
Product
SCC, Interceptor, Mobile Controller, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands
show email
SNMP Commands
RiOS 5.0 provides support for the following:
•  SNMP Version 1
•  SNMP Version 2c
RiOS 6.0 and later provides support for the following:
•  SNMP Version 3, which provides authentication through the User-based Security Model (USM).
•  View-Based Access Control Mechanism (VACM), which provides richer access control.
•  Enterprise Management Information Base (MIB).
•  Access Control Lists (ACLs) for users (v1 and v2c only).
For detailed information about SNMP traps sent to configured servers, see the SteelHead Management Console User’s Guide.
SNMP v3 provides additional authentication and access control for message security. For example, you can verify the identity of the SNMP entity (manager or agent) sending the message.
Using SNMPv3 is more secure than SNMP v1 or v2; however, it requires more configuration steps to provide the additional security features.