Configuration Mode Commands : SaaS Accelerator Manager commands : show service saas-accel proxy-chain
  
show service saas-accel proxy-chain
Displays the SaaS Accelerator proxy chain information.
Syntax
show service saas-accel proxy-chain <cr> | full
Parameters
full
Displays proxy chain information in detail.
Example
amnesiac (config) # show service saas-accel proxy-chain
Product
SteelHead CX, SteelHead-v, SteelHead-c, Client Accelerator, SCC
Related Commands
SaaS Accelerator commands
SteelHead Interceptor commands
This chapter describes commands you use to configure SteelHead Interceptor features. It includes these sections:
• Interceptor system commands
• Interceptor failover support commands
• Interceptor operating mode commands
• Load-balancing commands
• Interceptor peering and redirect commands
• Load-balancing in-path pass-through rules commands
• Path selection support commands
• VLAN segregation commands
• Instance configuration mode commands
• Displaying Interceptor information
We recommend that you use the Interceptor Management Console to configure the SteelHead Interceptor. For details, see the SteelHead Interceptor User Guide and the SteelHead Interceptor Deployment Guide.
You must also set up the host and networking configuration, configure in-path interfaces, and configure in-path rules for deployments that use the SteelHead Interceptor for load balancing. These commands are common to the SteelHead and SteelHead Interceptor. For detailed information, see the previous sections of this chapter.
Interceptor system commands
This section describes the Interceptor system commands.
For hardware-assist rule commands, see Hardware-assist rule commands.