failover steelhead interceptor name
Configures the hostname for the failover SteelHead Interceptor.
Syntax
[no] failover steelhead interceptor name <hostname> {additional-ip <ip-address> | main-ip <ip-address>}
Parameters
<hostname> | Hostname of the failover SteelHead Interceptor appliance. |
additional-ip <ip-address> | Specifies one or more additional IP addresses (separated by commas) of the failover SteelHead Interceptor appliance. • For IPv4 addresses, use this format: XXX.XXX.XXX.XXX/XX • For IPv6 addresses, use this format: X:X:X::X/XXX |
main-ip <ip-address> | Specifies the main IP address of the failover SteelHead Interceptor appliance. • For IPv4 addresses, use this format: XXX.XXX.XXX.XXX/XX • For IPv6 addresses, use this format: X:X:X::X/XXX |
Usage
There can be only one failover SteelHead Interceptor.
You must restart the service for your changes to take effect.
You can enter either IPv4 or IPv6 addresses. However, if you have enabled IPv6 connection forwarding, you must enter an IPv6 address. For more information about enabling IPv6 connection forwarding, see the SteelHead Interceptor User Guide.
The no command option removes the failover SteelHead Interceptor from the configuration and removes the hostname.
For detailed information about configuring the failover SteelHead Interceptor process, see the SteelHead Interceptor Deployment Guide.
This command replaces the failover buddy name command.
Example
amnesiac (config) # failover steelhead interceptor name test additional-ip 10.0.0.2
Product
Interceptor
Related Commands
Interceptor operating mode commands