remote password
Sets the password to remotely connect to the remote management port.
Syntax
[no] remote password <password>
Parameters
<password> | Password to connect to the remote management port. |
Usage
To set a remote management port password
• On the SteelHead, assign a password to the remote management port:
amnesiac (config) # remote password root
• Using the IPMItool on a remote computer, view the power status of the SteelHead. If you are using the Windows version of IPMItool, replace all references to ipmitool with ipmitool.exe.
ipmitool -H <remote port ip address> -P "root" chassis power status
Output should state Chassis Power is on.
You can download a Linux version at http://sourceforge.net/projects/ipmitool/files/.
Example
amnesiac (config) # remote password root
Product
SteelHead CX, Interceptor
Related Commands
Hardware-assist rule commands
The following section describes the hardware-assist rule commands for the SteelHead and SteelHead Interceptor.