Policy Pages Reference : System Settings Policies : Logging
  
Logging
You can configure remote logging servers, log rotation and filtering, and log viewing preferences for the selected system settings policy in the Logging page.
By default, the system rotates each log file every 24 hours or if the file size reaches one Gigabyte uncompressed. You can change this to rotate every week or month and you can rotate the files based on file size.
The automatic rotation of system logs deletes your oldest log file, labeled as Archived log #10, pushes the current log to Archived log # 1, and starts a new current-day log file.
The Logging page contains the following groups of settings:
•  Logging Configuration
•  Adding a New Log Server
•  Adding a New Process Logging Filter
Logging Configuration
Complete the configuration as described in this table.
Control
Description
Minimum Severity
Select the minimum severity level for the system log messages. The log contains all messages with this severity level or higher. Select one of the following levels from the drop-down list:
•  Emergency - Unusable system.
•  Alert - Action must be taken immediately.
•  Critical - Conditions that affect the functionality of the SCC.
•  Error - Conditions that probably affect the functionality of the SCC.
•  Warning - Conditions that could affect the functionality of the SCC, such authentication failures.
•  Notice - Normal but significant conditions, such as a configuration change. This is the default setting.
•  Info - Informational messages that provide general information about system operations.
Note: This control applies to the system log only. It does not apply to the user log.
Maximum Number of Log Files
Specify the maximum number of logs to store. The default value is 2000.
Lines Per Log Page
Specify the number of lines per log page. The default value is 1024.
Rotate Based On
Specify one of the following rotation options:
•  Time - Select Day, Week, or Month from the drop-down list.
•  Disk Space - Specify how much disk space, in megabytes, the log uses before it rotates. The default value is 9999 MB.
Note: The log size of the log file is only checked on 10-minute intervals.
Adding a New Log Server
Complete the configuration as described in this table.
Control
Description
Add a New Log Server
Displays the controls for configuring new log servers.
Server IP
Specify the server IP address.
Minimum Severity
Select the minimum severity level for the log messages. The log contains all messages with this severity level or higher. Select one of the following levels from the drop-down list:
•  Emergency - Unusable system.
•  Alert - Action must be taken immediately.
•  Critical - Conditions that affect the functionality of the SCC.
•  Error - Conditions that probably affect the functionality of the SCC.
•  Warning - Conditions that could affect the functionality of the SCC, such authentication failures.
•  Notice - Normal but significant conditions, such as a configuration change. This is the default setting.
•  Info - Informational messages that provide general information about system operations.
Add
Adds the server to the list.
Remove Selected
Select the check box next to the name and click Remove Selected.
Adding a New Process Logging Filter
Complete the configuration as described in this table.
Control
Description
Add a New Process Logging Filter
Displays the controls to add a new process logging filter.
Process
Select one of the following from the drop-down list:
•  alarmd - Alarm manager
•  cifs - CIFS Optimization
•  cmcfc - SCC Auto-registration Utility
•  rgp - SCC Connector
•  rgpd - SCC Connection Manager
•  cli - Command-line interface
•  mgmtd - Device Control and Management
•  http - HTTP Optimization
•  hald - Hardware Abstraction Daemon
•  notes - Lotus Notes Optimization
•  mapi - MAPI Optimization
•  nfs - NFS Optimization
•  pm- - Process Manager
•  qosd - QoS Classification
•  sched - Process Scheduler
•  ssl - SSL optimization.
•  shark - SteelCentral Shark, that enables SteelCentral Packet Analyzer to perform remote packet analysis on trace files captured and stored in the SCC without having to transfer large packet capture files across the network.
•  virt_wrapped - RSP VMware Interface
•  rspd - RSP Watchdog
•  statsd - Statistics Collector
•  wdt - Watchdog Timer
•  webasd - Web Application Process
•  domain_auth - Windows Domain Authentication
Minimum Severity
Select one of the following from the drop-down list:
•  Emergency - Unusable system.
•  Alert - Action must be taken immediately.
•  Critical - Conditions that affect the functionality of the SCC.
•  Error - Conditions that probably affect the functionality of the SCC.
•  Warning - Conditions that could affect the functionality of the SCC, such authentication failures.
•  Notice - Normal but significant conditions, such as a configuration change. This is the default setting.
•  Info - Informational messages that provide general information about system operations.
Add
Adds a new process.
Remove Selected
Select the check box next to the name and click Remove Selected.