Overview of the Management Console
  
Overview of the Management Console
This chapter provides an overview of the Management Console. The Management Console makes managing your SteelHead simpler through a web browser interface. It includes these topics:
•  Prerequisites
•  Using the Management Console
•  Next Steps
This chapter assumes you have installed and configured the SteelHead. For details, see the SteelHead Installation and Configuration Guide.
This chapter also assumes you are familiar with the various deployment options available to you. For details, see the SteelHead Deployment Guide.
Prerequisites
This section provides information about product dependencies and compatibility. It includes this information:
•  Hardware and Software Dependencies
•  SCC Compatibility
•  Ethernet Network Compatibility
Hardware and Software Dependencies
This table summarizes the hardware and software requirements for the SteelHead.
Riverbed Component
Hardware and Software Requirements
SteelHead
19-inch (483-mm) two-post or four-post rack.
SteelHead Management Console, SteelCentral Controller for SteelHead
Any computer that supports a web browser with a color image display.
The Management Console has been tested with all versions of Chrome, Mozilla Firefox Extended Support Release version 38, and Microsoft Internet Explorer 11.
The SteelCentral Controller for SteelHead has been tested with Mozilla Firefox Extended Support Release version 38 and Microsoft Internet Explorer 11.
JavaScript and cookies must be enabled in your web browser.
SCC Compatibility
To manage SteelHead 9.2 appliances, you need to use SCC 9.2. Earlier versions of the SCC don’t support SteelHead 9.2 appliances. For details about SCC compatibility across versions, see the SteelCentral Controller for SteelHead Installation Guide.
The ESX SteelHead-c supports SCC.
Ethernet Network Compatibility
The SteelHead supports these Ethernet networking standards. A SteelHead with a Gigabit Ethernet card supports jumbo frames on in-path and primary ports.
Ethernet Standard
IEEE Standard
Ethernet Logical Link Control (LLC)
IEEE 802.2 - 1998
Fast Ethernet 100BASE-TX
IEEE 802.3 - 2008
Gigabit Ethernet over Copper 1000BASE-T (All copper interfaces are autosensing for speed and duplex.)
IEEE 802.3 - 2008
Gigabit Ethernet over Fiber 1000BASE-SX (LC connector)
IEEE 802.3 - 2008
Gigabit Ethernet over Fiber 1000BASE-LX
IEEE 802.3 - 2008
Gigabit Ethernet over Fiber 10GBASE-LR Single Mode
IEEE 802.3 - 2008
Gigabit Ethernet over 10GBASE-SR Multimode
IEEE 802.3 - 2008
The SteelHead ports support these connection types and speeds:
Port
Speed
Primary (PRI)
10/100/1000BASE-T, autonegotiating
Auxiliary (AUX)
10/100/1000BASE-T, autonegotiating
LAN
10/100/1000BASE-T, 1000BASE-SX, 1000BASE-LX, 10GBASE-LR, 10GBASE-SR (depending on configuration)
WAN
10/100/1000BASE-T, 1000BASE-SX, 1000BASE-LX, 10GBASE-LR, 10GBASE-SR (depending on configuration)
ethX_Y/Data Interfaces
10/100/1000 BASE-T, autonegotiating
The SteelHead supports VLAN Tagging (IEEE 802.3 - 2008). It doesn’t support the ISL protocol.
The SteelHead autonegotiates speed and duplex mode for all data rates and supports full duplex mode and flow control (IEEE 802.3 - 2008).
SNMP-Based Management Compatibility
This product supports a proprietary Riverbed MIB accessible through SNMP. SNMPv1 (RFCs 1155, 1157, 1212, and 1215), SNMPv2c (RFCs 1901, 2578, 2579, 2580, 3416, 3417, and 3418), and SNMPv3 are supported, although some MIB items might only be accessible through SNMPv2 and SNMPv3.
SNMP support enables the product to be integrated into network management systems such as Hewlett-Packard OpenView Network Node Manager, BMC Patrol, and other SNMP-based network management tools.