failover steelhead interceptor name
Configures the hostname for the failover SteelHead Interceptor.
Syntax
[no] failover steelhead interceptor name <hostname> {additional-ip <ip-address> | main-ip <ip-address>}
Parameters
<hostname> | Hostname of the failover SteelHead Interceptor appliance. |
additional-ip <ip-address> | Specifies one or more additional IPv4 addresses (separated by commas) of the failover SteelHead Interceptor appliance. |
main-ip <ip-address> | Specifies the main IPv4 address of the failover SteelHead Interceptor appliance. |
Usage
There can be only one failover SteelHead Interceptor.
You must restart the service for your changes to take effect.
The no command option removes the failover SteelHead Interceptor from the configuration.
For detailed information about configuring the failover SteelHead Interceptor process, see the SteelHead Interceptor Deployment Guide.
Note: This command replaces the failover buddy name command.
Example
amnesiac (config) # failover steelhead interceptor name test additional-ip 10.0.0.2
Product
Interceptor
Related Commands
Interceptor Operating Mode Commands