steelhead communication heartbeat enable
Configures the SteelHead communication heartbeat settings.
Syntax
[no] steelhead communication heartbeat enable
Parameters
None
Usage
When this command is enabled, the connection forwarding neighbors are sending heartbeat messages to each other periodically. A heartbeat message is a repeating signal from one appliance to another to indicate that the appliance is operating.
The no command option disables the heartbeat settings.
Example
amnesiac (config) # steelhead communication heartbeat enable
Product
Interceptor, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands