in-path cdp interval
Configures the refresh period for CDP. The refresh period allows for a quick recovery in failover deployments with PBR and CDP.
Syntax
[no] in-path cdp interval <seconds>
Parameters
<seconds> | CDP refresh interval in seconds. The default value is 1. |
Usage
The no command option resets the CDP refresh period to the default value.
Example
amnesiac (config) # in-path cdp interval 10
Product
Interceptor, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands
Connection Forwarding
This section describes connection forwarding commands, typically used with the SteelHead Interceptor.
Note: To use connection forwarding with IPv6, both SteelHeads must be running RiOS 8.5 or later and you must enable multiple interface support. The control connection between neighbors is still IPv4 only.