in-path simplified mac-def-gw-only
Configures VLAN IDs in simplified routing table look-ups.
Syntax
[no] in-path simplified mac-def-gw-only
Parameters
None
Usage
It might be necessary to override the information learned from the simplified routing entries. By default, simplified routing takes precedence over static routes. Use this command to change this behavior. This command instructs the SteelHead to only use the simplified routing table if the packet is destined for the default gateway. If a matching static route is present, the static route entry will override the information learned from simplified routing.
The no command option disables the in-path feature.
Example
amnesiac (config) # in-path simplified mac-def-gw-only
Product
SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands
Asymmetric Route Detection Commands
This section describes the asymmetric route detection commands.