snmp-server trap-interface
Configures the system to use the IP address of the specified interface in the SNMP trap header.
Syntax
[no] snmp-server trap-interface <interface>
Parameters
<interface> | Interface name. |
Usage
The trap interface setting sets which interface IP address is used in the agent-address header field of SNMP v1 trap Protocol Data Units (PDUs). It does set the interface for the trap.
Traps are sent out the Primary interface. If the primary interface is physically disconnected, no traps are sent. Traps can be sent out the auxiliary interface if the trap receiver is reachable from the auxiliary interface.
The no command option disables the trap interface.
Example
amnesiac (config) # snmp-server trap-interface aux
Product
SCC, Interceptor, Mobile Controller, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands