Configuration Mode Commands : System Administration Commands : SNMP Commands : snmp-server trap-community
  
snmp-server trap-community
Configures the default community string for sending traps.
Syntax
[no] snmp-server trap-community <trap-community-name>
Parameters
<trap-community-name>
Password-like trap-community string to control access. Use a combination of uppercase, lowercase, and numerical characters to reduce the chance of unauthorized access to the SteelHead.
Community strings allow printable 7-bit ASCII characters except for white spaces. Community strings cannot begin with the pound (#) or hyphen (-) characters.
This trap-community name is the default community string for the snmp-server host command.
Usage
The no option of this command disables the trap.
Example
amnesiac (config) # snmp-server trap-community public
Product
SCC, Interceptor, Mobile Controller, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands
snmp-server host, show snmp