alarm clear
Clears the specified alarm type.
Syntax
alarm <type> clear
Parameters
<type> | See the alarm enable command for a complete listing and description of alarm types. |
Usage
Use this command to clear the status of the specified alarm type. If you clear an alarm and the error condition still exists, the alarm might be triggered again immediately. If you need to clear an alarm permanently, use the no alarm enable command.
Example
amnesiac (config) # alarm secure_vault_unlocked clear
Product
SCC, Interceptor, Mobile Controller, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands