show alarm
Displays the status of the specified alarm. For detailed information about alarms, see the SteelHead Management Console User’s Guide.
Syntax
show alarm <type>
Parameters
<type> | See the alarm enable command for a complete listing and description of alarm types. |
Example
amnesiac # show alarm warning_temp
Alarm Id: Warning Temperature
Alarm Description: The temperature of the appliance is above normal
Enabled: yes
Alarm State: ok
Error threshold: 70
Clear threshold: 67
Last error at: None
Last clear at: None
Product
Interceptor, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c, Mobile Controller
Related Commands