Mapping LUNs to an Edge
The LUN Mapping Wizard enables you to quickly add LUNs, Edges, and iSCSI portals and targets to the Core configuration.
To map LUNs to Edges
1. Choose Configure > Wizards: LUN Mapping to display the LUN Mapping Wizard.
2. In the iSCSI Initiator Name field, specify the initiator name to use when accessing your iSCSI storage device.
3. Click Next to open the Start page of the LUN Mapping Wizard.
This page lists prerequisites for mapping LUNs, including the specific initiator that must be added to the iSCSI Portal Initiator list.
4. Click Next to display the Specify Portal page.
5. Specify the iSCSI portal using the controls described in this table.
Control | Description |
Select from known Portals | • Hostname or IP address - Select a previously configured iSCSI portal. Devices that appear in this list are independently configured in the Configure > Storage Array: iSCSI, Initiators, MPIO page. • Port - Specify the port number of the iSCSI portal. The default is 3260. • Authentication - Select an authentication method (None or CHAP) from the drop-down list. If you select CHAP, the CHAP User field displays where you specify (or create) the CHAP username. |
Add new Portal | Specify the IP address and port for the intended iSCSI portal. |
6. Click Next to display the Manage Targets page.
7. Select and add targets from the Discovered Targets List, which displays the targets discovered on the portal selected in the previous screen.
8. Click Next to display the Mount LUNs page.
9. Select and add LUNs from the Discovered LUNs List, which displays the LUNs discovered on the targets selected in the previous page.
10. Click Next to open the Specify SteelFusion Edge page.
Note: The term “SteelFusion Edge” refers to both Edge and xx60 model appliances in dedicated SteelFusion target mode.
11. Complete the Edge configuration using the controls described in this table.
Control | Description |
Select from known SteelFusion Edges | From the Hostname drop-down list, select a previously configured SteelFusion Edge. Devices that appear in this list are independently configured in the Configure > Manage: SteelFusion Edges page. For details, see Configuring Edges. |
Add new SteelFusion Edge | Specify the hostname for the intended Edge. |
12. Click Next to display the Map LUNs to Edge page.
13. Select and map LUNs from the top panel, which displays the unmapped LUNs, to the Edge selected in one of the preceding screens.
14. Click Next to display the Summary page.
15. Click Exit to complete the LUN mapping procedure.