Performing the Initial Setup
This section describes how to use the Management Console wizards to quickly configure your network, time zone, and initiator settings. You can also use these wizards to quickly perform basic configuration tasks, such as adding Edges and iSCSI portals.
After initial setup, you can further modify the Core configuration using the relevant pages in the SteelFusion Core Management Console.
This section includes the following topics:
Before You Begin
To map LUNs to an Edge, you must first complete the following tasks:
• Determine the hostname of your Edge.
• Configure an iSCSI portal with iSCSI targets and LUNs.
• Add the appropriate initiator to the iSCSI Portal Initiator list.
Note: If you do not know the hostname, iSCSI portal, or initiator name, you can obtain this information from the Start page of the LUN Mapping Wizard.