storage iscsi session immediate-data enable
Enables the initiator to attach the write data command to the initial iSCSI PDU.
Syntax
[no] [failover-peer] storage iscsi session immediate-data enable
Parameters
failover-peer | Performs the command on the failover peer of the current appliance. If the failover peer is unavailable, the changed configuration is automatically applied when the appliance returns to service. You can run failover-peer commands only on a Core appliance in ActiveSolo failover state. |
Usage
Together with the
storage iscsi session initial-r2t enable command, the
storage iscsi session immediate-data enable command can reduce I/O time by eliminating the need for an additional round trips in small write commands between the initiator the target.
Use the no command option to disable this feature.
Example
Core_02 (config) # storage iscsi session immediate-data enable
Core_02 (config) # failover-peer storage iscsi session immediate-data enable
Product
SteelFusion Core
Related Commands