Definitions : Traffic Analysis Filters
  
Traffic Analysis Filters
Traffic analysis filters are used by Packet Analyzer Plus when applying application views to traffic. The protocol filters web UI page lists applications and their IP protocol, server port(s), and server IP address(es). If these applications in your network do not use the same IP protocols, server port(s), or server IP address(es), the protocol filter definitions can be revised to match those used by your applications. This ensures that Packet Analyzer Plus views reliably report this application traffic in your network.
The filters are fixed and cannot be renamed or deleted. They can be disabled.
The default filters work in most networks. Errors made when revising or disabling these filters can cause unreliable results when application views are applied in Packet Analyzer Plus.
If changes are made to these filters, they must be synchronized with any Packet Analyzer Plus using this AppResponse 11 system as a probe.
This section covers the following:
◼ Example Use Cases
◼ Editing Protocol Filters
◼ Adding a Definition to a Filter
◼ Synchronizing Changes with Packet Analyzer Plus