Viewing Reports : Viewing Performance Details Reports
  
Viewing Performance Details Reports
The Performance Details report displays details about the performance of the appliances such as product, model, reduction, and throughput.
For details about operating report controls, see Overview.
What This Report Tells You
The Performance Details report answers these questions:
•  What is the appliance name?
•  What is the product name?
•  What is the model number?
•  What is the reduction size?
•  What is the throughput?
About Report Graphs
Use the mouse to hover over a specific data point to see what the throughput and reduction values are.
About Report Data
The Riverbed reporting functionality polls bandwidth and connection metrics every 15 seconds and reports on performance for periods up to one month. Every 15-second sample is used for calculating its average and peak value. However, due to performance and disk space considerations, data representation in reports for periods longer than the latest five minutes are interpolated between data points obtained by aggregating more than one 15-second sample. The display granularity decreases with time passed since data was sampled.
For detailed information about data grouping, see Data Grouping.
To view the Performance Details report
1. Choose Reports > Optimization: Performance Details to display the Performance Details page.
Figure: Performance Details Report
2. Use the controls to customize the report as described in this table.
Control
Description
Time Interval
Select a report time interval of 1 hour (1h), 1 day (1d), 1 week (1w), 30 days (30d), yesterday, last week, or last month.
Time intervals that do not apply to a particular report are dimmed.
For a custom time interval, enter the start time and end time using the format YYYY/MM/DD HH:MM:SS.
Because the system aggregates data on the hour, request hourly time intervals. For example, setting a time interval to 08:30:00 to 09:30:00 from 2 days ago does not create a data display, whereas setting a time interval to 08:00:00 to 09:00:00 from 2 days ago will display data.
When you request a custom time interval to view data beyond the aggregated granularity, the data is not visible because the system is no longer storing the data. For example, the following custom time intervals do not return data because the system automatically aggregates data older than 7 days into 2-hour data points:
•  Setting a 1-hour time period that occurred 2 weeks ago.
•  Setting a 75-minute time period that occurred more than 1 week ago.
You can quickly see the newest data and see data points as they are added to the chart dynamically. To display the newest data, click Show newest data.
Type
Select a type (Optimized, Pass Through, Both) from the drop-down list.
Traffic
Select a traffic direction (Bi-Directional, WAN to LAN, or LAN to WAN) from the drop-down list.
Group
Select the group from the drop-down list.
Note: For detailed information about exporting statistics, see Exporting Statistics.