SteelConnect SDI-5030 Specifications
  
SteelConnect SDI-5030 Specifications
This appendix describes the technical and environmental specifications for the SteelConnect SDI-5030 gateway.
•  Technical specifications
•  Power requirements and consumption
•  Environmental specifications
Technical specifications
Specification
Definition
Form factor
1U
Hard drive disk
1 x 3.5 in 1 TB SATA HDD
Memory
8 x 16GB DDR4 = 128 GB
Dimensions
With bracket and power supply handle
1.72 in. (43.6 mm) x 17.25 in. (439 mm) x 30.25 in. (769 mm)
Without bracket and power supply handle
1.72 in. (43.6 mm) x 17.25 in. (439 mm) x 28 in. (712 mm)
Weight
33 lb (14.96 kg)
Voltage frequency
47 to 63 Hz
Power supply unit
750 W
Power requirements and consumption
This table summarizes the power specifications for the gateway. The gateway is rated at the following power characteristics when operating at nominal AC input voltages (110 V and 220 V).
Specification
Definition
Configuration
1 + 1 redundant power
PSU Type
2 x 750 W
AC Input
90 to 130 on 110 V systems, 180-260 on 220 V systems
Typical Watts
285 W
Power Factor
50% load >90%
BTU (Typical)
972
Environmental specifications
Specification
Definition
Operating acoustic
7.0 BA
Temperature (operating)
50ºF to 95ºF (10ºC to 35ºC)
Temperature (storage)
-40ºF to 158ºF (-40ºC to 70ºC)
Relative humidity
50 to 90%, noncondensing
Altitude (operating)
10, 000 ft (3050 m)