show stats storage lun-iops
Displays the standard I/O operations per second written to and read from the specified LUN for the specified period of time.
Syntax
show stats [failover-peer] storage lun-iops {interval <time-interval> lun <lun-id> | start-time <start> end-time <end> lun <lun-id>}
Parameters
failover-peer | Performs the command on the failover peer of the current appliance. |
interval <time-interval> | Returns statistics for one of the following time intervals: • 1min—Past minute. • 5min—Past five minutes. • hour—Past hour. • day—Past day. • week—Past week. • month—Past month. |
lun <lun-id> | Specifies the identifier of the desired LUN. |
start-time <start> | Specifies the start time to return statistics. Use the format 'yyyy/mm/dd hh:mm:ss'. |
end-time <end> | Specifies the end time to return statistics. Use the format 'yyyy/mm/dd hh:mm:ss'. |
Usage
Use this command to display how many operations have been written to and read from the specified LUN for the specified period.
All failover-peer commands enable you to perform the command on the failover peer of the current appliance.
Example
Core_01 > show stats storage lun-iops interval month lun hqD9Vo/hRSYU
Total Read IOs: 1
Total Write IOs: 0
Product
Core