show stats storage filer-bytes
Displays the number of bytes written to and read from the specified SAN (storage area network) for the specified period of time.
Syntax
show stats [failover-peer] storage filer-bytes {interval <time-interval> filer <hostname> | start-time <start> end-time <end> filer <hostname>}
Parameters
failover-peer | Performs the command on the failover peer of the current appliance. |
interval <time-interval> | Returns statistics for one of the following time intervals: • 1min—Past minute. • 5min—Past five minutes. • hour—Past hour. • day—Past day. • week—Past week. • month—Past month. |
filer <hostname> | Specifies the IP address of the filer portal. |
start-time <start> | Specifies the start time to return statistics. Use the format 'yyyy/mm/dd hh:mm:ss'. |
end-time <end> | Specifies the end time to return statistics. Use the format 'yyyy/mm/dd hh:mm:ss'. |
Usage
Use this command to display how many megabytes have been written to and read from the specified SAN for the specified period.
All failover-peer commands enable you to perform the command on the failover peer of the current appliance.
Example
Core_02 > show stats storage filer-bytes interval month filer 10.1.x.x
Total Data Read: 512 Bytes
Total Data Written: 0 Bytes
Product
Core