show stats storage dr-resync-bytes
Displays statistics summarizing the amount of data remaining to be written to the secondary data center to bring it into sync after replication is resumed. These bytes were recorded to the journal LUN while replication was suspended.
Syntax
show stats [failover-peer] storage dr-resync-bytes {interval <time-interval> lun <lun-id> | start-time <start> end-time <end> lun <lun-id>}
Parameters
failover-peer | Performs the command on the failover peer of the current appliance. |
interval <time-interval> | Returns statistics for one of the following time intervals: • 1min—Past minute. • 5min—Past five minutes. • hour—Past hour. • day—Past day. • week—Past week. • month—Past month. |
lun <lun-id> | Specifies the identifier of the desired LUN. |
start-time <start> | Specifies the start time to return statistics. Use the format 'yyyy/mm/dd hh:mm:ss'. |
end-time <end> | Specifies the end time to return statistics. Use the format 'yyyy/mm/dd hh:mm:ss'. |
Usage
All failover-peer commands enable you to perform the command on the failover peer of the current appliance.
Example
Core_01 > show stats storage dr-resync-bytes interval day lun P3KRP502Gu8x
Current Resync bytes remaining: 0 Bytes
Core_02 > show stats failover-peer storage dr-resync-bytes start-time ’2015/01/31 15:59:59’ end-time ’2015/01/31 16:10:00’ lun all
Current Resync bytes remaining: 552.2 Bytes
Product
Core
Related Commands