Configuration Mode Commands : Core commands : device-failover peer clear (Core)
  
device-failover peer clear (Core)
Clears the failover peer configuration for the current Core.
Syntax
device-failover peer clear
Parameters
None
Usage
This command is used to properly deactivate high availability between two Cores.
To remove a high-availability configuration between two Cores (Core 01 and Core 02, for the purposes of this example), use the following commands in the listed sequence:
1. On Core 02, stop the Core service using the no service enable command.
2. On Core 01, run device-failover peer clear (Core) to clear the local failover configuration.
3. On Core 02, run device-failover activate to return the appliance to solo mode.
4. Enable Core 02 and run device-failover peer clear (Core) to clear the local failover configuration.
Example
Core 02 (config) # device-failover peer clear
 
Core 02 (config) # show device-failover
Product
Core