protocol ssl hsm slot
Configures the HSM slot settings for the slot from which the server-side SteelHead accesses the private key objects on the HSM.
Syntax
protocol ssl hsm slot <slot-number> slot-pin <password>
Parameters
<slot-number> | Slot number. This number corresponds to the HSM partition assigned to the server-side SteelHead. The show protocol ssl hsm safenet command displays the assigned slot number. All slots assigned to the SteelHead should have the same slot pin. |
slot-pin <password> | Specifies the password for the HSM partition that corresponds to this slot. |
Usage
This command allows the server-side SteelHead to log in to the HSM to allow access to the private key objects.
Example
amnesiac (config) # protocol ssl hsm slot 1 slot-pin hsmpass
Product
SteelHead CX
Related Commands
SteelHead SaaS Commands
This section describes the commands unique to the SteelHead SaaS feature. You can use the command-line to perform basic cloud configuration tasks, display configuration information, and check status. Some commands require information available only from the Riverbed Cloud Portal.