nettest run net-gateway
Runs the network gateway test.
Syntax
nettest run net-gateway [ipv6]
Parameters
ipv6 | Runs the IPv6 network gateway test. |
Usage
Determines if each configured gateway is connected correctly. Run this test to ping each configured gateway address with four packets and record the number of failed or successful replies. The test passes if all four packets are acknowledged. The default packet size is 64 bytes.
If the test fails and all packets are lost, ensure that the gateway IP address is correct and that the SteelHead is on the correct network segment. If the gateway is reachable from another source, check the connections between the SteelHead and the gateway.
If the test fails and only some packets are lost, check your duplex settings and other network conditions that might cause dropped packets.
Example
amnesiac (config) # nettest run net-gateway
Product
SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands