raid swraid add-disk-force
Forcibly adds a failed disk back into the system of RAID arrays. Does not require physically removing and re-inserting the drive.
Syntax
raid swraid add-disk-force <disk>
Parameters
<disk> | Physical drive number of the drive to be added. |
Usage
Use this command to forcibly add drives back into the system without removing and re-inserting the drive physically. The parameter is the physical drive number. The command takes care of re-adding the partitions on the drive to all the appropriate RAID arrays.
Example
amnesiac (config) # raid swraid add-disk-force 1
Product
Controller, Mobile Controller, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c, SteelHead Interceptor
Related Commands