protocol srdf symm id base-rdf-group
Sets the Remote Data Facility (RDF) group number value to a 0-based or a 1-based group type.
Syntax
[no] protocol srdf symm id <name> base-rdf-group <base>
Parameters
<name> | Symmetrix ID. The Symmetrix ID is an alpha-numeric string (for example, a standard Symmetrix serial number: 000194900363). |
<base> | RDF base type: • 0 - Specify if your RDF group is a 0-based group type. • 1 - Specify if your RDF group is a 1-based group type. This is the default value for RDF groups. |
Usage
RiOS allows you to configure RDF group numbers starting from 0 or 1. EMC tools used in Open Systems environments (such as EMC Solutions Enabler) typically refer to RDF groups in the 1-based notation. Mainframe-based tools typically use the 0-based notation.
Use this command if you want to change from the default 1-based type to the 0-based type, such as to match the notation that for a Symmetrix mainframe environment.
Example
amnesiac (config) # protocol srdf symm id 0123 base-rdf-group 0
Product
SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands