Enables Citrix client device mapping.

None

Use this command on the client-side and server-side SteelHead appliances to provide latency optimization for file transfers that use CDM between the Citrix client and server. CDM allows a remote application running on the server to access printers and disk drives attached to the local client machine. The applications and system resources appear to the user at the client machine as if they are running locally during the session. For example, in the remote session, C: is the C drive of the remote machine and the C drive of the local thin client appears as H:.

Bidirectional file transfers between the local and remote drives use one of many virtual channels within the ICA protocol. The individual data streams that form the communication in each virtual channel are all multiplexed onto a single ICA data stream. This feature provides latency optimization for file transfers in both directions.

You can use CDM optimization with or without secure ICA encryption. Both the client-side and server-side SteelHead appliances must be running RiOS 7.0.

By default, CDM optimization is disabled.

Enabling CDM optimization requires an optimization service restart.

SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c