topology site clear uplinks
Clears all the configured uplinks for the site.
Syntax
topology site {<site-name> | local | default-site} clear uplinks [confirm]
Parameters
<site-name> | Site name: for example, data center. |
local | Specifies the local site name, which is where the SteelHead is located. |
default-site | Specifies the default site, which is the match anything, catch-all site that is used if nothing else matches. This site has a subnet of 0.0.0.0/0. You do not need to add a remote site if you only have one remote site and the default site is suitable. The default site cannot be removed. |
confirm | Confirms to clear the configured uplinks. |
Usage
An uplink is a physical connection from a site to a network, with its own upstream and downstream bandwidths. It is the last network segment connecting the local site to a WAN network. A site can have single or multiple uplinks to the same network and can connect to multiple networks.
Example
amnesiac (config) # topology site us-dc1 clear uplinks
Product
SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands