in-path peer-probe-cach
Configures VLAN IDs in simplified routing table look-ups.
Syntax
[no] in-path peer-probe-cach
Parameters
None
Usage
In order for the SteelHead to learn about the correct VLAN ID information, you must disable probe caching. When probe caching is disabled, the SYN packet of every connection has the probe request attached to it (assuming the connection should be optimized based on the in-path rules).
You can turn off probe-caching on the server-side SteelHead or on the client-side SteelHead. The difference between the two methods is one of convenience. If there are 25 client-side SteelHeads and 1 server-side SteelHead, it is easier to instruct the data center SteelHead to inform the remote SteelHeads not to perform probe-caching. The alternative is to disable probe-caching on all 25 SteelHeads in the remote offices. Enter this command on the server-side SteelHead. When enabled, the server-side SteelHead instructs the client-side SteelHead not to cache the probe-response.
For details, see the SteelHead Deployment Guide.
The no command option disables the in-path feature.
Example
amnesiac (config) # in-path peer-probe-cach
Product
SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands