wccp override-return route-no-gre
Enables the SteelHead to accept whatever return direction is negotiated, but it returns traffic by using the in-path routing table, and will not use GRE encapsulation.
Syntax
[no] wccp override-return route-no-gre
Parameters
None
Usage
Typically, you use this command where you have an in-path gateway, which means traffic is returned to the in-path gateway. You configure the WCCP service group to specify either. By choosing either, the router and SteelHead negotiate whether to use L2 or GRE for redirects, and separately, for returns as well. Certain platforms and I/OS's support L2 redirects to the SteelHead (usually the 6500s or 7600s depending on their supervisor engine), and even fewer combinations support L2 return. (The 12.2(SXH) does support L2 return.) This command should only be used if there is an L2 hop between the SteelHead and the next hop according to the routing table. For details, see the SteelHead Deployment Guide,
The no command option disables WCCP override support.
Example
amnesiac (config) # wccp override-return route-no-gre
Product
SteelHead CX, SteelHead EX, Interceptor, SteelHead-v, SteelHead-c
Related Commands