wccp adjust-mss enable
Enables the Adjust Maximum Segment Size (MSS) feature.
Syntax
[no] wccp adjust-mss enable
Parameters
None
Usage
The default for the SteelHead is to have the Don’t Fragment (DF) bit set to 1 so that packets are not fragmented. However, this occasionally causes issues with WCCP using GRE and when VPN tunnels are used for SteelHead connections. The result is dropped packets.
This command shrinks the MSS to fit accordingly.
The no command disables the Adjust MSS feature.
Example
amnesiac (config) # wccp adjust-mss enable
Product
SteelHead CX, SteelHead EX, Interceptor, SteelHead-v, SteelHead-c
Related Commands