failover steelhead addr
Sets the IP address for a failover SteelHead. A failover SteelHead is a backup appliance. If the master fails, the failover appliance takes over.
Syntax
[no] failover steelhead addr <ip-address>
Parameters
<ip-address> | IP address for the failover, backup machine. The default value is 0.0.0.0. If you have installed multiple bypass cards, you must specify the IP address for the inpath0_0 slot. |
Usage
The no command option resets the failover IP address to the default value.
Example
amnesiac (config) # failover steelhead addr 10.10.10.1
Product
SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands