srcaddr <ip-address> | Specifies the source subnet IP address and netmask. Use the format XXX.XXX.XXX.XXX/XX for IPv4 and X:X:X::X/XXX for IPv6. |
srcaddr all-ip | Specifies all IPv4 and all IPv6 addresses. This is the default. |
srcaddr all-ipv4 | Specifies all IPv4 addresses. |
srcaddr all-ipv6 | Specifies all IPv6 addresses. |
dstaddr <ip-address> | Specifies the destination subnet IP address and netmask. Use the format XXX.XXX.XXX.XXX/XX for IPv4 and X:X:X::X/XXX for IPv6. |
dstaddr all-ip | Specifies all IPv4 and all IPv6 addresses. This is the default. |
dstaddr all-ipv4 | Specifies all IPv4 addresses. |
dstaddr all-ipv6 | Specifies all IPv6 addresses. |
dstport <port> | Specifies a single port (number), a port label, or all to specify all ports. |
vlan <vlan-tag-id> | Specifies the VLAN tag ID (if any). The VLAN tag ID is a number with a range from 0 to 4094. Specify 0 to mark the link untagged. |
rule-enable true | Enables an in-path rule. |
rule-enable false | Disables an in-path rule. |
rulenum <rule-number> | Specifies the order in which the rule is consulted: 1-N or start or end. The rule is inserted into the list at the specified position. For example, if you specify rulenum as 3, the new rule will be #3, the old rule #3 will become #4, and subsequent rules, if any, will also move down the list. Specify start for the rule to be the first rule and end for the rule to be the last rule. If you do not specify a rule number, the rule is added to the end of the list. |
description <description> | Specifies a description to facilitate network administration. |