logging trap
Sets the minimum severity for messages sent to the remote syslog servers.
Syntax
[no] logging trap <log-level>
Parameters
<log-level> | Logging severity level. The follow severity levels are supported: • emerg - Emergency, the system is unusable. • alert - Action must be taken immediately. • crit - Critical conditions. • err - Error conditions. • warning - Warning conditions. • notice - Normal but significant conditions, such as a configuration change. This is the default setting. • info - Informational messages. The default value is notice. |
Usage
The no command option sets the severity level for logging to none.
Example
amnesiac (config) # logging trap notice
Product
SCC, Interceptor, Mobile Controller, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands
License and Hardware Upgrade Commands
This section describes the license and hardware upgrade commands.