Configuration Mode Commands : System Administration Commands : Logging Commands : logging
  
logging
Adds a remote system log (syslog) server to the system.
Syntax
[no] logging <ip-address> [trap <log-level>]
Parameters
<ip-address>
IP address for the syslog server.
trap <log -level>
Specifies the trap log level of the syslog server:
•  emerg - Emergency, the system is unusable.
•  alert - Action must be taken immediately.
•  critical - Critical conditions.
•  err - Error conditions.
•  warning - Warning conditions.
•  notice - Normal but significant conditions, such as a configuration change. This is the default setting.
•  info - Informational messages.
If you have set different log levels for each remote syslog server, this option changes all remote syslog servers to have a single log level.
Usage
The no command option removes a remote syslog server from the system.
Example
amnesiac (config) # logging 10.0.0.2
Product
SCC, Interceptor, Mobile Controller, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands
show logging