tcp connection send reset
Configures TCP connection tools for debugging the system.
Syntax
tcp connection send reset
{both local-addr <local-ip-address> local-port <port> remote-addr <remote-ip-address> remote-port <port> |
local-only local-addr <local-ip-address> local-port <port> remote-addr <remote-ip-address> remote‑port <port> |
remote-only remote-addr <remote-ip-address> remote-port <port> local-addr <local-ip-address> local-port <port>}
Parameters
both local-addr <local ip-address> local-port <port> remote-addr <remote-ip-address> remote-port <port> | Terminates the connection for the local and remote SteelHeads. |
local-only local-addr <local-ip-address> local-port <port> remote-addr <remote-ip-address> remote-port <port> | Terminates the connection for the local SteelHead. |
remote-only remote-addr <remote-ip-address> remote-port <port> local-addr <local-ip-address> local-port <port> | Terminates the connection for the remote SteelHead. |
Usage
Terminates connections between SteelHeads so that you can debug connection problems in your network.
Example
amnesiac (config) # tcp connection send reset both local-only local-addr 10.0.0.1 local‑port 1240 remote-addr 10.0.0.2 remote-port 1300
Product
SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-v, SteelHead-c
Related Commands