tcp connection send keep-alive
Configures TCP connection tools for debugging the system.
Syntax
tcp connection send keep-alive local-addr <local-ip-address> local-port <port> remote-addr <remote ip-address> remote-port <port>
Parameters
local-addr <local ip-address> local-port <port> remote-addr <remote ip-address> remote-port <port> | Specifies a local and remote SteelHead for which you want to terminate a connection. |
Usage
Enables a keep-alive timer between a local and remote SteelHead so that you can determine if there is an active connection between the appliances. If the appliance is down, it terminates the connection. Use this command to debug connection problems in your network.
Example
amnesiac (config) # tcp connection send keep-alive local-addr 10.0.0.1 local-port 1240 remote-addr 10.0.0.2 remote-port 1300
Product
SCC, Interceptor, Mobile Controller, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands