ip default-gateway
Sets the default gateway for the appliance.
Syntax
[no] ip default-gateway <ip-address>
Parameters
<ip-address> | IP address of the management interface. |
Usage
This command is used to set the default gateway for the entire appliance. It is primarily used for the primary or auxiliary (aux) interfaces for management, but can also be used for out-of-path optimization configurations as well as PFS.
The no command option disables the default gateway IP address.
Example
amnesiac (config) # ip default-gateway 10.0.0.12
Product
SCC, Interceptor, Mobile Controller, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands