steelhead interceptor communication mode-ipv6
Enables IPv6 connection forwarding between SteelHead Interceptors in an appliance cluster.
Syntax
[no] steelhead interceptor communication mode-ipv6
Parameters
None
Usage
Before using this command, these tasks are required:
• Path selection must be disabled. To disable path selection, use the no path-selection enable command.
• Remove all appliances from the connection forwarding appliance list and the failover appliance list. To remove an appliance from these lists, use the no command option with the appropriate CLI command (for example, no interceptor name, no steelhead interceptor name or no failover steelhead interceptor name).
The no option of this command disables IPv6 connection forwarding between SteelHead Interceptors in an appliance cluster.
Use this command on each SteelHead Interceptor in the cluster.
You must restart the service for your changes to take effect.
Example
amnesiac (config) # steelhead interceptor communication mode-ipv6
Product
Interceptor
Related Commands