steelhead name
Configures connection forwarding neighbors.
Syntax
[no] steelhead name <name> {main-ip <ip-address> [port <port>] | additional-ip <ip-address>}
Parameters
<name> | Hostname of the neighbor appliance. |
main-ip <ip-address> | Specifies the main connection forwarding IPv4 address or IPv6 address of the neighbor. • For IPv4 addresses, use this format: XXX.XXX.XXX.XXX/XX • For IPv6 addresses, use this format: X:X:X::X/XXX |
port <port> | Specifies the connection forwarding port of the neighbor. |
additional-ip <ip-address> | Specifies an additional connection forwarding IP address for the neighbors. |
Usage
For details about configuring connection forwarding, see the SteelHead Deployment Guide.
The no command option disables the neighbor.
Example
The following example shows a connection forwarding neighbor configured with an IPv4 address:
amnesiac (config) # steelhead name test main-ip 10.0.0.1 port 1234
The following example show a connection forwarding neighbor configured with an IPv6 address:
amnesiac (config) # steelhead name test main-ip 2600:809:200:47 f:20e:b6ff:fe90:209
Product
Interceptor, SteelHead CX, SteelHead-v, SteelHead-c
Related Commands