Step 4 Connect to the console port
Connect to the console port as follows:
1. Connect a laptop or other device to the console connector using the RJ45 to 9-pin D-subminiature cable supplied in the accessory kit. Add any necessary connector converter. The cable wiring is available under “Specifications” in the AppResponse 11 Installation Guide.
2. Set the device's terminal emulator to 9600 Baud, 8 data bits, 1 stop bit, no parity bit, and no flow control.
If there is no video output, you need to use a keyboard and monitor instead. Connect them as follows:
1. Connect a keyboard to a USB port.
2. Connect a monitor to the VGA port.
3. Set the device's terminal emulator to 9600 Baud, 8 data bits, 1 stop bit, no parity bit, and no flow control.
Note: After this installation is completed you can use the console port for any future connections.