service cloud-accel redirect port
Specifies the destination port used to redirect connections through the SteelHead SaaS.
Syntax
service cloud-accel redirect port <port>
Parameters
<port> | Port number for UDP connections to the Akamai network. |
Usage
Use this command to specify a port number for the configurable outbound port for UDP connections to the Akamai network or leave the default value (9545) as it is. The SteelHead connected to the Akamai network uses this configurable UDP port over a wide range of IP addresses.
Example
amnesiac (config) # service cloud-accel redirect port 65
Product
SteelHead, SteelHead-v, SteelHead-c
Related Commands