show stats storage lun-iops
Displays the LUN I/O report for the specified time period.
Syntax
show stats storage lun-iops {interval <time-interval> lun {<lun-id> | all} | start-time <start> end-time <end> lun {<lun-id> | all}
Parameters
interval <time-interval> | Returns statistics for one of the following time intervals: •1min - Past minute. •5min - Past five minutes. •hour - Past hour. •day - Past day. •week - Past week. •month - Past month. |
start-time <start> | Specifies the start time to return statistics. Use the format 'yyyy/mm/dd hh:mm:ss'. |
end-time <end> | Specifies the end time to return statistics. Use the format 'yyyy/mm/dd hh:mm:ss'. |
lun <lun-id> | Specifies the name of the LUN. |
lun all | Displays information for all configured LUNs. |
Usage
Use this command to display the number of megabytes and operations written to and read from the specified LUN for the specified period.
Example
Edge1 # show stats storage lun-iops interval month lun 000001
Average Read IOPS: 0.6668 op/sec
Average Write IOPS: 1.3347 op/sec
Product
SteelFusion Edge
Related Commands